We know how using various adapters adds weight and cost to
the connections. It also adds to the possibility of a missed or loose connection to a lead
wire. So, to eliminate the need for adapters to get a 90 degree electrode connection,
we had the company who manufacturers our wires and adapters, build a 36 inch, 3.5mm lead wire
with 90 degree TENS pins at the end. In order to be compliant, they had to manufacture the 3.5mm end female.
We found a 3.5mm male to male adapter that fits right into the end and will go directly into your ErosTek, Folsom, EStim
Systems or PES power box. If you have any other power box using a 3.5mm audio
lead, these will work fine for them too.
These leads are heavy-duty and will last a long time when used properly. As a matter
of fact, we warrant them for a year as our normal policy. They should, with proper use, last a lot longer.
The TENS Pins are soldered into a steel covered housing and then filled with
an industrial black epoxy. When cured, is as durable a product that you will find
anywhere. You most likely will not find a product like this one on the market.
It is recommended to make sure that the 3.5mm stereo ends
are seated solidly into the power box and lead wire. You may find that even though they are pushed all the
way in and appear to be seated, you may have to slightly pull the connection out to make proper
contact. At least that is what we experienced. Every power box connection has
an internal contact with the lead wires that may vary slightly.
Also available in a 90 degree Banana pin model. It can be found in the Wiring and
Adapter section of our product catalog.