|
|
|
Classic 4 - Insertable Electrode
This combination hard plastic and stainless steel insertable electrode is sure to please. It has two
stainless steel contoured plates embedded into a durable hard plastic teardrop design for easy insertion and comfortable use.
Each stainless plate is connected at the bottom with a TENS pin socket. Standard for this insert. Click
on the picture at the right for a larger view.
This probe is 1" wide and 7/8"
thick. It is 2" long and the neck at the base is 3/8" in diameter. The pull ring at the bottom is 1-1/2"
wide and 1/4" thick. The finger hole to remove the plug is 3/4" in diameter.
If you are using a
power unit that has Banana or Snap connectors, be sure that you have the proper TENS to Banana or Snap adaptors.
These
adaptors can be purchased in our Wiring and Adaptors store tab or simply click on the picture to be directed to that page.
Note: If using this insert as a single pole electrode
you will need to use a Y-Joiner to connect both of the TENS sockets to a single connection that connects to one power lead
wire. You can purchase these Joiners in our Wiring and Adaptor section of our estore or by clicking on the picture below.
Item #Classic4
|
|
