New Style Combo Clip for Conductive Rubber
This spring loaded clip will safely and securely hold your power box lead wires
to our conductive rubber sheeting and flat conductive strip and even to our V2000 conductive liner. This clip attaches
a Banana pin lead wire from your power box to our Flat Rubber 3/4" strips, our conductive rubber sheeting and is
especially handy to connect power your V2000 conductive liner. Until now, most of our sheeting, V2000 liners and flat
rubber was charged by fastening an alligator clip to the conductive rubber. While this may work, the sharp
teeth of regular alligator clips, if not filed, will eventually damage the conductive rubber. This
handy little clip eliminates that possible damage.
It is simple to use by plugging an ordinary Banana pin
connection into the back of the clip. There is a wide stainless steel mouth at the other end with a
couple of small teeth deep inside at the back that bite into the conductive rubber. A heavy spring lever is used to
clamp down onto the rubber once it is positioned into place. The pictures below show how it connects.
You can purchase these individually or in pairs to connect both of your lead wires. These
clips are primarily made to attach the V2000 liner material, flat conductive sheeting and any other DIY device that might
require a small mouthed clip of some sort to a flat surface.
If you want to use a TENS pin instead of a banana pin, you can insert a small piece of 4x2mm conductive tube into
the banana socket on the clip and then plug your TENS pin into it. Make a cheap converter. A wonderful addition
to your wiring and adapter collection and at a great price.
Individually priced at $4.95, in sets of 2 they are
$8.95, you save about dollar. In the Drop Down box below, please indicate one or a set of 2. The default is one
NOTE: Lead wires and conductive rubber are sold separately.